Home | » Products | » PLACUT PLASMA CUTTING MACHINES | » AP SERIES (200, 200A, 200B) |
AP SERIES (200, 200A, 200B)
Able to operate with different gas to for suiting different working conditions
Using Air for a fast and convenient cutting.
Using Nitrogen (N2) for stainless steel to prevent its cutting surface from oxidization.
Using Oxygen (O2) for mild steel for a faster cutting speed and preventing the cutting surface from nitrogenization.
Cutting speed is faster than traditional plasma cutting and even Laser: The cutting speed of mild steel is 3200mm/min for 9mm thickness and 2000mm/min for 15mm thickness.
The special design of our dual tips provides you the following advantages:
A faster cutting speed
A higher piercing capacity
A better protection from spatter for work pieces; and
A longer usage life of the consumables.
Easy connection with CNC systems. The usage life of our oxygen electrode is 6 ~8 times longer than the normal electrode, which greatly reduces the cutting cost.
Specification:
Input Voltage (3-PHASE) and Current (Inverter system)
| VAC | Hz | A |
200V | 50/60 | 129 | |
220V | 60 | 118 | |
380V | 50/60 | 68 | |
415V | 50 | 63 | |
460V | 50/60 | 56 | |
Max Output Current | 200A | ||
Input Power | 45 KVA | ||
Output Power | 36KW | ||
Max OCV | 320V | ||
Duty Cycle | 100% | ||
Size (L*W*H) | 1130mm x 580mm x 1120mm | ||
Weight | 225Kg | ||
Plasma Gas | O2, Air / N2, H35 + N2 | ||
Shield Gas | Air / N2 / None |
Cutting Capacity:
Production cutting capacity (piercing) - mild steel | 25mm |
Max piercing capacity - mild steel | 38mm |
Max cutting capacity (edge start) - mild steel | 50mm |
Production cutting capacity (piercing) - stainless steel | 25mm |
Max piercing capacity - mild steel | 38mm |
Serverance cutting capacity (edge start) - mild steel | 70mm |
![]() |
EGP SALES CORPORATION
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |